VM System Flow Rate

The flow rates through the set of manifolds should be (0.1 to 0.25 litres/minute per tube) in the range of 1 gpm per 20-tube manifold. Increased flow rates will only increase the system pressure drop. There will not be any improvement in the system performance.

NOTE: The information presented in this page is for guidance only - no part of this may be used for any agreement, whether express or implied, or to form any contract. THERMO TECHNOLOGIES reserves the right to change specifications and prices without prior notice.




Flow Rates

20 - 30 tubes
40 - 90 tubes
100 - 120 tubes

1 - 1.5 gpm
2.0 - 4.5 gpm
5.0 - 6.0 gpm

Contact Thermo Technologies